Table of Contents
Advertisement
G720-Install-IG101 Installation Guide
Task
Optional: Configure the DNS service.
Optional: Customize the domain ID.
Verify that the device operates
correctly.
Back up the configuration.
Optional: Power off the devices.
Shipping Carton Contents
When unpacking the device, verify that the contents of the shipping carton are complete. Save the shipping carton and
packaging in the event you need to return the shipment.
•
The Brocade switch
•
An accessory kit containing the following items:
–
RJ-45 to mini-USB adapter
–
Two 1.82m (6 ft) power cords
–
Optical transceivers
–
Rubber feet
–
RoHS hazardous toxic substance content chart
–
Download Instructions for Fibre Channel Networking Software and Documents
•
Inner foam
NOTE
Transceivers may be shipped in the accessory tray instead of installed in switch ports.
Broadcom
Task Details or Additional Information
dnsconfig
Use the
command to create DNS server entries. Refer to the
Brocade Fabric OS Administration Guide.
configure
Use the
command to change the domain ID (default ID is 1). See
Setting the Domain ID
for more information.
•
Check the LEDs to verify operation of functional parts. See
Side LEDs
and
Interpreting Nonport-Side
•
The following commands can be useful to establish an operational baseline
for the device. Refer to the Brocade Fabric OS Command Reference
Manual for more information on these commands.
–
errdump
–
fanshow
–
historyshow
–
psshow
–
tempshow
configupload
Use the interactive
See
Backing Up the Configuration
shutdown
Enter the
command and wait for the device to power down,
and then unplug the power cords. See
information.
®
Brocade
LEDs.
command to back up the configuration.
for more information.
Powering Down the Device
G720 Switch Hardware Installation Guide
Completed
Interpreting Port-
for more
G720-Install-IG101
18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Brocade G720 and is the answer not in the manual?