Shipping Carton Contents - Broadcom G610 Hardware Installation Manual

53-1004408-11 Installation Guide
Task
Provide power to the device.
Attach a management station,
establish a serial connection, and
change the default passwords
(optional).
Set the IP address, the subnet mask,
and the default gateway IP address.
Set the date and time.
Customize the switch name and
chassis name.
Establish an Ethernet connection.
Optional: Configure the DNS service.
Optional: Customize the domain ID.
Verify that the device operates
correctly.
Back up the configuration.
Optional: Power off the devices.

Shipping Carton Contents

When unpacking the device, verify that the contents of the shipping carton is complete. Save the shipping carton and
packaging in the event you need to return the shipment.
•
The Brocade G610 device
•
An accessory kit containing the following items:
Broadcom
Task Details or Additional Information
See Providing Power to the
See Establishing a First-Time Serial
on to the serial port to configure the device.
ipaddrset
Use the command to configure a static device IP address, subnet
mask, and gateway IP address, or you can use a DHCP server to obtain the
information dynamically. See
•
date
Use the command to display and set the date and time.
•
tstimezone
Use the
•
tsclockserver
Use the
external NTP server.
See Setting the Date and Time
•
switchname
Use the
•
chassisname
Use the
See Customizing the Chassis Name and Switch Name
By establishing an Ethernet connection, you can complete the device
configuration using a serial session, Telnet, or a management application, such
as Brocade Network Advisor. See
dnsconfig
Use the command to create DNS server entries. Refer to the
Brocade Fabric OS Administration Guide.
configure
Use the command to change the domain ID (the default ID is 1).
See Setting the Domain ID
•
Check the LEDs to verify the operation of functional parts. See
Correct Operation.
•
The following commands may be useful to establish an operational baseline
for the device. Refer to the Brocade Fabric OS Command Reference
Manual for more information on these commands.
–
chassisshow
–
errdump
–
fanshow
–
historyshow
–
psshow
–
sfpshow
–
tempshow
configupload
Use the interactive
See Backing Up the Configuration
shutdown
Enter the command and wait for the device to power down,
and then unplug the power cord. See
information.
Device.
Connection. After completing this task, log
Configuring the IP Address.
command to display and set the time zone.
command to synchronize the time with an
for more information.
command to change the default switch name.
command to change the default chassis name.
Establishing an Ethernet
for more information.
command to back up the configuration.
for more information.
Powering Down the Device
®
Brocade G610 Switch Hardware Installation Guide
for more information.
Connection.
Verifying
for more
Completed
53-1004408-11
16