Toro Multi Pro 1750 Service Manual page 68

6. Install fittings finger tight and far enough to make
sure that they are not cross−threaded before tightening
them with a wrench.
7. Position hydraulic tester hoses to prevent moving
machine parts from contacting and damaging the hoses
or tester.
Hydraulic System
8. Check fluid level in the hydraulic reservoir/transaxle.
After connecting test equipment, make sure reservoir/
transaxle is full.
9. Check control linkages for improper adjustment,
binding, or broken parts.
10.All hydraulic tests should be made with the hydraulic
fluid at normal operating temperature.
Page 4 − 20 Multi Pro 1750