Operator Advisories - Toro Multi Pro 1750 Service Manual

Operator Advisories

The list below identifies the operator advisories that are
generated by the Toro Electronic Controller (TEC). An
advisory will be displayed on the InfoCenter Display.
Typically, an advisory can be eliminated with a change
in machine controls by the operator.
Advisory
200
201
202
203
204
205
206
207
208
209
210
211
212
213
220
221
222
223
224
225
226
231
232
233
234
235
236
237
238
241
Multi Pro 1750
Start Prevented − Pump switch active
Start Prevented − Not in neutral
Start Prevented − User not in seat
Start Prevented − Throttle pedal is not home
Start Prevented − Starter engage timeout
Pump start prevented − boom active
Pump start prevented − engine rpm high
Throttle/Speed lock prevented − Pump is not active
Throttle lock prevented − parking brake is not engaged
Speed lock prevented − Operator not in seat or parking brake is engaged
Throttle/Speed lock prevented − Clutch or service brake is engaged
Flow sensor calibration − Fill water in tank and enter volume filled
Flow sensor calibration − Turn on the pump
Flow sensor calibration − Turn on all the booms
Flow sensor calibration − Calibration commenced
Flow sensor calibration − Calibration complete
Flow sensor calibration − Exiting calibration mode
Speed sensor calibration − Fill the fresh water tank, press next
Speed sensor calibration − Fill the sprayer half full with water, press next
Speed sensor calibration − Enter the calibration distance, press next
Speed sensor calibration − Mark and drive the entered distance with booms off
Speed sensor calibration − Speed sensor calibration in progress
Speed sensor calibration − Speed sensor calibration complete
Speed sensor calibration − Turn off the booms
Calibrator out of bounds, using default
Page 5 − 21
Advisory Description
Parking brake is engaged
Tank low volume alert
Rinse pump ON
Flow sensor calibration
Speed sensor calibration
Electrical System