Toro Multi Pro 1750 Service Manual page 251

16.To remove shift arms:
A. Loosen and remove nut. Remove 2nd−3rd shift
arm together with shift arm plate, spring, lock nut,
washer and cap screw.
B. Loosen and remove lock nut from 1st−Rev. shift
arm and remove shift arm.
C. Loosen cap screws (Fig. 28) and remove keeper
plates.
D. Remove oil seals from transaxle case and dis-
card seals.
E. Inspect shift arms and keeper plates for bending
or damage and replace if necessary.
17.Remove cap screws and nut with washer. Separate
PTO cover from transaxle case. Inspect PTO cover for
cracks or damage and replace if necessary.
Multi Pro 1750
1
3
5
2
1. Nut
nd rd
2. 2 −3 shift arm
3. Shift arm plate
4. Spring
5. Lock nut
1
2
3
1. Cap screw
2. Keeper plate
1. Cap screw (5)
2. Nut
Page 7 − 25
7
6
4
8
9
Figure 27
6. Washer
7. Cap screw
8. Lock nut
9. 1st−Rev shift arm
1
2
3
Figure 28
3. Oil seal
2
3
1
Figure 29
3. PTO cover
Drive Train