Toro Multi Pro 1750 Service Manual page 297

4. Secure clevis pin by inserting return spring end into
clevis pin.
5. Tighten cable jam nuts to secure parking brake cable
to caliper bracket. Position jam nuts so that all threads
on cable are showing towards the rear of the vehicle.
6. Position cables in parking brake bracket and install
cable ends in brake equalizer.
7. Secure parking brake cables to bracket with retain-
ing rings.
Multi Pro 1750
8. Attach equalizer to parking brake lever with clevis
pin (item 3), flat washer and hair pin.
9. Install rear wheels (see Wheel Assemblies in this
chapter).
10.Install front left fender assembly.
11. Adjust parking brake (see Operator's Manual).
Check parking brake operation before returning ma-
chine to regular service.
Page 8 − 19 Chassis