Toro Multi Pro 1750 Service Manual page 264

6. Assemble R−1 and 2−3 fork shaft:
A. Insert R−1 fork shaft into R−1 fork.
B. Drive lock pin into fork and fork shaft. Pay atten-
tion to direction of slit in lock pin.
C. Insert 2−3 fork shaft into 2−3 fork.
D. Drive lock pin into fork and fork shaft. Pay atten-
tion to direction of slit in lock pin.
7. Assemble countershaft:
A. Use a press to install two (2) new bearings onto
countershaft.
B. Install collar and retaining ring.
C. Install countershaft gear onto shaft.
D. Install retaining ring.
E. Slide collar onto shaft.
F. Use a press to install new bearing.
Drive Train
1. Lock pin
2. Shift fork
2
1
1. Bearing
2. Collar
3. Gear
4. Collar
Page 7 − 38
Figure 61
3. Fork shaft
7
4
3
6
5
Figure 62
5. Retaining ring
6. Retaining ring
7. Bearing (2)
8. Countershaft
Multi Pro 1750
8