15.Assemble reduction shaft and countershaft together
with 1st−reverse fork shaft.
16.Insert reduction shaft and countershaft assembly
into transaxle case. Insert head of shift arm into groove
of fork when installing the assembly.
17.Assemble main shaft together with 2nd−3rd fork
shaft.
18.Insert main shaft and 2−3 fork shaft assembly into
transaxle case. Insert head of shift arm into groove of
fork while installing.
Multi Pro 1750
NOTE: This
shaft not
used on
Multi Pro
NOTE: Not
used on
Multi Pro
NOTE: Not
used on
Multi Pro
Page 7 − 43
1
Figure 75
Figure 76
Figure 77
Figure 78
Drive Train