Toro Multi Pro 1750 Service Manual page 231

Problem
Transaxle sticks in gear.
Transaxle slips out of gear.
Overheating of transaxle.
Multi Pro 1750
Possible Causes
Clutch is not releasing fully.
Shift linkage is damaged, loose or out of adjustment.
Shift fork detent ball in transaxle is stuck.
Sliding gears in transaxle are tight on shaft splines.
Synchronizer shift keys in transaxle are damaged.
Shift linkage out of adjustment.
Transaxle gear loose on shaft.
Worn or damaged teeth on transaxle gear.
Excessive end play in transaxle gears.
Lack of spring pressure on shift fork detent ball in
transaxle.
Badly worn bearings in transaxle.
Oil level too high.
Excessive hydraulic load.
See Chapter 4 − Hydraulic System for hydraulic
system issues.
Page 7 − 5 Drive Train