Toro Multi Pro 1750 Service Manual page 273

C. Insert steel balls and springs into the grooves.
D. Apply silicone sealant to mating surface of fork
shaft case.
E. Install fork shaft case. Install and tighten flange
head screws to a torque from 18 to 22 ft−lb (25 to 29
N−m).
F. Check operation of shifters and detent.
26.Apply moly disulfide grease to washer and insert
washer into housing of transaxle case.
Multi Pro 1750
1. Spindle
2. Spring (2)
2
1. Flange head screw (1)
2. Flange head screw (3)
Page 7 − 47
2
3
1
Figure 87
3. Ball (2)
3
1
2 18 to 22 ft−lb
(25 to 29 N−m)
Figure 88
3. Fork shaft case
1
Figure 89
1. Washer
Drive Train
2