4.13 Sewing - DURKOPP ADLER 610-10 Operating Instructions Manual

40

4.13 Sewing

The pedal starts and controls the sewing process.
Fig. 22: Sewing
(1) - Sew stitch condensation and
cut off thread
(2) - Lift sewing foot
INITIAL POSITION
• Pedal to position 0 (3):
 The machine is at a standstill.
Needle and sewing foot are up / down
To position the sewing material:
1. Press the pedal to position -1 (2).
 The sewing foot is lifted.
2. Push the sewing material into the initial position.
3. Press the pedal to position 0 (3).
 The sewing foot lowers onto the sewing material.
AT SEAM BEGINNING
Proceed as follows to start a seam:
1. Press the pedal (4) forward.
 The machine sews. The speed increases the further forward
the pedal is pressed.
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
(3) - Rest position
(4) - Sewing active
Operation
④
③
②
①