DURKOPP ADLER 610-10 Operating Instructions Manual page 72

70
Proceed as follows to create a new sewing program:
1. Tap the P button.
NEW
 The PROGRAMMING user interface is displayed.
Pressing the P button displays the number of the next free
program slot.
Fig. 40: Creating a new sewing program (1)
2. Tap <No Name> and input a name.
Information for inputting text:  p. 46.
Information
If no name is input for the sewing program, <No Name> continues
to be displayed.
 The left pane displays the 1
3. Set the sewing material size ( p. 65).
4. Set all parameters for the 1
5. Use the buttons TF on and TF off to specify if the tape feed
is turned on or off during this sewing step (610-10 only).
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
Settings via software
st
sewing step with its number.
st
sewing step.