DURKOPP ADLER 610-10 Operating Instructions Manual page 62

Mode AUTO Other program parameters
60
2. Tap the OK button.
 The correction value is saved, and the previous user inter-
face is displayed again.
Information
If changed in AUTO operating mode, the new correction value
remains active until the controller changes to the next program.
A tap on the Other program parameters button will bring up an
overview of all available parameters.
Fig. 33: Other program parameters in operating mode AUTO
Parameter
Thread Tension at Hook
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
Settings via software
Meaning
Looper thread tension
Value range
1 – 99