DURKOPP ADLER 610-10 Operating Instructions Manual page 109

Setup
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
Proper setting
Refer to the Technical data ( p. 109) chapter for the permissi-
ble operating pressure. The operating pressure cannot deviate by
more than ± 0.5 bar.
Fig. 63: Setting operating pressure
①
(1) - Pressure controller
To set the operating pressure:
1. Pull the pressure controller (1) up.
2. Turn the pressure controller (1) until the pressure gage (2)
indicates the desired operating pressure.
• Increase pressure = turn clockwise
• Reduce pressure = turn counterclockwise
3. Push the pressure controller (1) down.
(2) - Pressure gage
②
107