22
Fig. 3: Inserting and replacing the needle
①
②
(1) - Needle bar
(2) - Groove
To change the needle:
1. Turn the handwheel until the needle bar (1) reaches the upper
end position.
2. Loosen the screw (3).
3. Pull the needle out towards the bottom.
4. Insert the new needle.
Important
Align the needle in such a way that the groove (2) is pointing
to the rear.
5. Tighten the screw (3).
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
(3) - Screw
Operation
③