DURKOPP ADLER 610-10 Operating Instructions Manual page 67

Settings via software
Mode EDIT Setting the sewing material size
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
Symbols/buttons
To set a parameter:
1. Tap the desired button.
 The user interface for setting the desired parameter is
displayed.
For some parameters the setting is more than just a numerical
value. These more complex parameters are described in detail
below.
Abb. 36: Setting the sewing material size
Meaning
Setting the stitch length in mm
Switch the seam length measurement in
the current sewing step on or off
Other sewing step parameters in EDIT
operating mode,  p. 69
65