90
Fig. 51: Checking the operating pressure
①
(1) - Pressure controller
To set the operating pressure:
1. Pull the pressure controller (1) up.
2. Turn the pressure controller (1) until the pressure gage (2)
indicates the desired operating pressure.
• Increase pressure = turn clockwise
• Reduce pressure = turn counterclockwise
3. Push the pressure controller (1) down.
6.3.2
Draining the water condensation
NOTICE
Property damage from excess water condensation!
Too much water condensation can result in damage to the
machine.
If necessary, drain the condensation water as described.
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
(2) - Pressure gage
Maintenance
②