DURKOPP ADLER 610-10 Operating Instructions Manual page 79

Settings via software
Mode
PROGRAMMING
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
To set the fullness:
1. Select the type of fullness.
 The type of fullness selected is displayed in an activated
control field within the symbol.
2. If a higher or lower degree of fullness is required, use the
arrows to display more buttons.
3. Input the fullness using the buttons 0 to 16.
Other program parameters
A tap on the Other program parameters button will bring up an
overview of all available parameters.
Fig. 45: Other program parameters
77