Operation
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
4.4
Threading the needle thread
Fig. 4: Threading the needle thread (1)
①
(1) - Thread guide
To thread the needle thread:
1. Fitting the thread reel onto the left plate of the thread reel
holder (2).
2. Feed the thread from the front to the rear through the 1
on the front. Feed the thread from the rear to the front through
the next hole.
Important
The thread guide (1) must be positioned vertically above the
thread reel holder (2).
(2) - Thread reel holder
②
st
hole
23