Settings via software
5.4
Operating mode AUTO
Fig. 28: Operating mode AUTO
①
②
③
④
Header (1)
Operating mode AUTO is displayed. The buttons + F% and - F%
offer quick access for setting the fullness correction in %.
The setting affects the fullness of the entire sewing program.
Left pane (2)
The graphical representation of the entire seam, divided into the
number of programmed sewing steps, is displayed here. A red bar
with an arrow indicates the direction of sewing and progress of
the sewn seam.
54
Operating Instructions 610-10/630-10 - 01.0 - 01/2021