DURKOPP ADLER 610-10 Operating Instructions Manual page 43

Operation
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
WHEN SEWING
The speed increases the further forward the pedal is pressed:
1. Pedal in Position 0 (3).
 The machine stops.
Needle and sewing foot are up / down.
Proceed as follows to continue the seam:
1. Press the pedal (4) forward.
 The machine continues to sew.
AT THE END OF THE SEAM
Proceed as follows to end the seam:
1. Press the pedal to position -2 (1) and keep it there
 The thread is cut.
The machine stops.
Needle and sewing foot are raised.
2. Remove the sewing material.
41