DURKOPP ADLER 610-10 Operating Instructions Manual page 75

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
11. Select whether the new sewing program should be mirrored for
the other side of the sewing material (Mirror programmed
side to other side), the other side of the sewing material
should be programmed (Program other side) or the pro-
gramming should be ended (Finish).
 The selected function is indicated by an activated control
field.
12. Tap the OK button.
 The sewing program is saved. Depending on which function
is selected, different buttons are displayed:
Function
Mirror programmed side to other side
Program other side
Finish
Tapping the Abort button closes the selection window and brings
up the AUTO user interface.
Important
All previously entered data is deleted!
Parameters that can be set
The following table describes the parameters that can be set on
the PROGRAMMING user interface.
Symbols/buttons
AUTO
PROGRAMMING
AUTO
Meaning
Input the program name
There is only one display under
PROGRAMMING. A new sewing program
is automatically assigned the next free
program slot.
Select the right or left piece to be sewn
Button
73