2
Preparing the adjustment using the Schmidt MST-2000
Use screw clamps to attach a plain sheet of metal (e.g. 6 mm aluminum)
to the tabletop on the left-hand side of the machine.
Set up the thread scale with its suction cup base on the metal plate in such
a way that the sewing thread - coming from the thread lever - lines up with
thread guides both horizontally and vertically.
Important
Use a Serafil 30 black thread to set the thread tensioning plate.
cw = turn clockwise
ccw = turn counterclockwise
2.1 Setting the machine
Fig. 1: Setting the machine
①
②
(1) - Lock screw
(2) - Thread tension spring
(3) - Stop screw
To set the machine:
1. Switch on the machine.
2. Call up the service routine Service > Settings > Thr.Tens.Top
The software is used to define the necessary presettings on the
4
Adjusting the thread tensioning plate
③
( Service Instructions).
machine.
Adjusting the thread tensioning plate
④
⑤
(4) - Lock screw
(5) - Stop screw
(6) - Pre-tensioner
Additional Instructions M-Type PREMIUM - 00.0 - 04/2018
⑥