Evaluate The Run - GE AKTA GO Operating Instructions Manual

6 Run a method

6.5 Evaluate the run

6.5

Evaluate the run

Introduction
After the run is completed, the results can be evaluated using the Evaluation module.
To open the results, use the following steps. For more information on evaluating results,
refer to the UNICORN user documentation.
Step
1
2
3
Illustration of an evaluated run
The image below shows an example of the features available in the Evaluation module
in UNICORN 7.4.
2
Part Function
1 To integrate or remove integration click the fx button next to the curve name. To adjust
integration parameters go to the Peak tab.
2 Data from the integration is shown in a Peak table below the chromatogram. Customize
the Peak data table by clicking the settings icon on the top right of the Peak table.
86
Action
In the Evaluation module, click Result. Browse or search for your result file.
Check in the preview that you have the correct result file and click Open.
To save an evaluation file, click File:Save.
1
ÄKTA go Operating Instructions 29360951 AC