Äkta Go - GE AKTA GO Operating Instructions Manual

3 System description
3.1 ÄKTA go
3.1 ÄKTA go
Introduction
This section gives an overview of the ÄKTA go instrument.
Illustration of the ÄKTA go
system
The illustration below shows the ÄKTA go system. The computer with the UNICORN
software is located on the right hand side of the instrument to make room for accessories
on the left hand side of the instrument.
Exterior design
The liquid handling modules are placed on the front of the instrument. The instrument
is equipped with trays to collect spillage, and adjustable feet to level the instrument.
Buffer vessels can be placed on top of the instrument. Air ventilation, power cables, and
data cables are located at the rear of the instrument.
18
Run
ÄKTA go Operating Instructions 29360951 AC