Keithley 6482 Reference Manual page 36

Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Table 1-10
Output and display configuration menus
Configuration menu item
CONFIG > ON/OFF OUTPUT
CONFIG OUTPUT
AUTO OFF
DISABLE
ENABLE
ALWAYS
AFTER-TRIG-COUNT
ENABLE
DISABLE
ENABLE
CONFIG > DISPLAY TOGGLE
DISABLE DISPLAY
NOW
NEVER
SWEEP
STORE
CONFIG > DISPLAY CHANNEL SELECT
CONFIGURE DISPLAY
NOW
NEVER
SWEEP
STORE
6482-901-01 Rev. A / August 2012
Description
Configure output.
Enable or disable auto-off mode.
Keep output on.
Turn output off after each measurement.
After each measurement.
When trigger count expires.
Enable or disable output enable.
Disable output enable.
Enable output enable.
Enable or disable display.
Disable display immediately.
Never disable display.
Turn display off during sweep.
Turn display off during buffer store.
Configure displayed channel.
Select channel displayed immediately.
Never select displayed channel.
Select channel displayed during sweep.
Select channel displayed during buffer store.
Return to Section Topics
Section 1: Getting Started
1-23