Keithley 6482 Reference Manual page 34

Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Table 1-8
Trigger configuration menu
Configuration menu item
CONFIG > TRIG
CONFIGURE TRIGGER
ARM LAYER
ARM-IN
IMMEDIATE
GPIB
TIMER
MANUAL
TLINK
ONCE
NEVER
↓STEST
ONCE
NEVER
↑STEST
ONCE
NEVER
↑↓
ONCE
NEVER
ARM-OUT
LINE
EVENTS
TRIG-LAYER-DONE
COUNT
FINITE
INFINITE
TRIG-LAYER
TRIGGER-IN
IMMEDIATE
TRIGGER-LINK
ONCE
NEVER
TRIGGER-OUT
LINE
EVENTS
DELAY
COUNT
HALT
*For source (SOURCE), delay (DELAY), and measure (MEAS).
6482-901-01 Rev. A / August 2012
Description
Configure triggering.
Configure trigger model arm layer.
Select arm layer detection event.
Immediate event detection.
GPIB GET or *TRG.
After timer interval elapses, enter interval.
Front-panel TRIG key.
Enter TLINK line and state.
Bypass event detection once.
Never bypass event detection.
When SOT is pulsed low.
Bypass event detection once.
Never bypass event detection.
When SOT line is pulsed high.
Bypass event detection once.
Never bypass event detection.
STEST When SOT line is pulsed low or high.
Bypass event detection once.
Never bypass event detection.
Configure arm layer output trigger.
Select trigger link output line (1 through 6).
Enable or disable events.
Enable (ON) or disable (OFF) on exiting trigger layer.
Specify arm count.
Programmable count.
Continuous count.
Configure trigger layer of trigger model.
Select trigger layer detection event.
Trigger event occurs immediately.
Select trigger link line as event (1 through 6).
Bypass event detection once.
Never bypass event detection.
Configure trigger layer output trigger.
Select trigger link line (1 through 6).
Enable (ON) or disable (OFF)*
Program trigger delay time.
Program trigger count.
Return instrument to idle state.
Return to Section Topics
Section 1: Getting Started
1-21