Table of Contents
Advertisement
Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Custom sweep commands
Table 7-4
"Configure list,"
Table 7-4
Custom sweep commands
Command
:SOUR[1]:VOLT:MODE LIST
:SOUR[1]:LIST:VOLT < list>
:SOUR[1]:LIST:VOLT:APP <list>
:SOUR[1]:LIST:VOLT:POIN?
:SOUR[1]:SWE:RANG <name>
:SOUR2:VOLT:MODE LIST
:SOUR2:LIST:VOLT < list>
:SOUR2:LIST:VOLT:APPend <list>
:SOUR2:LIST:VOLT:POINts?
:SOUR2:SWE:RANG <name>
Custom sweep programming example
As an example of custom sweep operation, assume a five-point sweep with the following
parameters:
Source and measure channel: Channel 1
Voltage sweep mode: List (custom sweep)
Sweep voltage points: 7 V, 1 V, 3 V, 8 V, 2 V
Source delay: 100 ms
Table 7-5
described above.
Table 7-5
Custom sweep programming example
Command
*RST
:FORM:ELEM CURR1
:SOUR1:VOLT:MODE LIST
:SOUR1:LIST:VOLT 7,1,3,8,2
:TRIG:COUN 5
:SOUR1:DEL 0.1
:OUTP1 ON
:READ?
:OUTP1 OFF
6482-901-01 Rev. A / August 2012
summarizes remote commands used for custom sweep operation. See
for more details on these commands.
summarizes the basic remote command sequence for performing the custom sweep
Return to
Description
Select channel 1 voltage list (custom) sweep mode.
Define Channel 1 V-source list (list = V1, V2, ... Vn).
Add Channel 1 V-source list values (list = V1, V2, ...Vn).
Query length of Channel 1 V-source list.
Select Channel 1 source ranging (name = BEST, AUTO, or
FIXed).
Select channel 2 voltage list (custom) sweep mode.
Define Channel 2 V-source list (list = V1, V2, ... Vn).
Add Channel 2 V-source list values (list =V1, V2, ...Vn).
Query length of Channel 2 V-source list.
Select Channel 2 source ranging (name = BEST, AUTO, or
FIXed).
Description
Restore GPIB default conditions.
Select channel 1 measurement data.
Channel 1 list volts sweep mode.
7 V, 1 V, 3 V, 8 V, and 2 V Channel 1 sweep points.
Trigger count = Number of sweep points.
100 ms Channel 1 source delay.
Turn on Channel 1 source output.
Trigger sweep, request data.
Output 1 off.
Section Topics
Section 7: Sweep Operation
Section
16,
7-13
Advertisement
Table of Contents
