Table of Contents
Advertisement
Section 16: SCPI Command Reference
Table 16-6 (cont.)
SOURce command summary
Command
:SOURce[1]
:VOLTage
:STARt <n>
:STARt?
:STOP <n>
:STOP?
:STEP <n>
:STEP?
:SPAN <n>
:SPAN?
:CENTer <n>
:CENTer?
:SWEep
:SPACing <name>
:SPACing?
:POINts <n>
:POINts?
:DIRection <name>
:DIRection?
:RANGing <name>
:RANGing?
:LIST
:VOLTage <NRf>
:APPend <NRf>
:POINts?
:VOLTage?
16-10
Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Description
Path to configure channel 1 source (continued):
Specify start level for V-sweep; -30 to 30.
Query start level for voltage sweep.
Specify stop level for V-sweep; -30 to 30.
Query stop level for voltage sweep.
Specify step value for V-sweep; -30 to 30.
Query step value for voltage sweep.
Specify span; -30 to 30.
Query span.
Specify center point; -30 to 30.
Query center point.
Configure SWEep source mode:
Select sweep spacing type (LINear or LOGarithmic).
Query sweep spacing.
Specify number of sweep points (2 to 3000).
Query number of points in sweep.
Sweep from start to stop (UP) or from stop to
start (DOWN).
Query sweep direction.
Select source ranging mode (BEST, AUTO, or
FIXed).
Query source ranging mode.
Configure LIST source mode:
Create list of V-Source values; -30 to 30.
Add up to 30 V-Source values to end of list.
Query number of source values in list.
Query V-Source list.
Return to
Section Topics
Default
parameter SCPI
0
0
0
0
0
LINear
3000
UP
BEST
No effect
6482-901-01 Rev. A / August 2012
Advertisement
Table of Contents
