Keithley 6482 Reference Manual page 181

Section 13: Status Structure
Table 13-9
Error queue commands
Command
STATus
:QUEue
[:NEXT]?
:ENABle <list>
:ENABle?
:DISable <list>
:DISable?
:CLEar
SYSTem
:ERRor
[:NEXT]?
:ALL?
:COUNt?
:CODE
[:NEXT]?
:ALL?
:CLEar
Notes:
1. Power-up and *CLS empty the error queue. STATus:PRESet has no effect.
2. Power-up enables error messages and disables status messages. *CLS and STATus:PRESet have no effect.
Programming example: Read error queue
The following command reads the error queue:
STAT:QUE?
13-18
Description
STATus subsystem:
Read error queue:
Read and clear oldest error and status (code and message).
Specify error and status messages for error queue.
Read the enabled messages.
Specify messages not to be placed in queue.
Read the disabled messages.
Clear messages from error queue.
SYSTem subsystem:
Read error queue:
Read and clear oldest error and status (code and message).
Read and clear all errors and status (code and message).
Read the number of messages in queue.
Code numbers only:
Read and clear oldest error and status (code only).
Read and clear all errors and status (codes only).
Clear messages from error queue.
Return to
Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Section Topics
Comment
Note 1
Note 2
Note 2
Note 1
6482-901-01 Rev. A / August 2012