Table of Contents
Advertisement
Section 1: Getting Started
Measurement function keys:
MSR1
MSR2
DELTA
RATIO
Voltage bias source function keys:
SRC1
SRC2
EDIT keys:
Range keys:
AUTO
Operation keys:
DISPLAY CHANNEL SELECT Select channel 1 or channel 2 measurement for display.
DISPLAY TOGGLE
LOCAL
REL
FILTER
LIMIT
TRIG
SWEEP
DIGITS
SPEED
STORE
RECALL
CONFIG
MENU
EXIT
ENTER
Indicators:
EDIT
ERR
REM
TALK
LSTN
SRQ
REL
FILT
AUTO
ARM
TRIG
*
Power control:
POWER
OUTPUT ON/OFF
Handle:
Pull out and rotate.
1-6
Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Measure channel 1.
Measure channel 2.
Difference function.
Ratio function.
Channel 1 voltage bias source.
Channel 2 voltage bias source.
Increase value.
Decrease value.
Move cursor left.
Move cursor right.
Enable or disable autorange.
Increase manual range.
Decrease manual range.
Toggle between channel 1 and 2 display (add MSR2 to display for dual display mode).
Cancel remote operation.
Enable or disable relative reading (MSR1 or MSR2 function only).
Display digital filter status for present function and toggle filter on and off.
Perform configured limit tests.
Trigger a measurement from the front panel.
Start a configured sweep.
Change the number of digits of display resolution.
Change measurement speed by selecting accuracy or specifying NPLC.
Set buffer size and enable reading storage.
Display stored readings and timestamp.
Press CONFIG and then appropriate key to configure function or operation.
Access and configure Main Menu selections. When entering numeric data, use to
clear reading to minimum absolute value.
Cancels selection. Use to return to the previous menu.
Accepts selection.
Instrument is in edit mode.
Questionable reading, invalid calibration step.
Instrument is in GPIB remote mode.
Instrument is addressed to talk over GPIB.
Instrument is addressed to listen over GPIB.
Service request over GPIB.
Relative measure reading displayed.
Digital filter enabled.
Autoranging enabled.
Source-measure operations being performed.
External trigger source selected.
Reading being stored.
Turns the instrument power on or off.
Turns the sources on or off.
Return to
Section Topics
6482-901-01 Rev. A / August 2012
Advertisement
Table of Contents
