Dual Pump Specifics - Thermo Scientific thermoscientific Vanquish Pumps C Operating Manual

9.2.6

Dual Pump Specifics

9.2.6.1
Sharing the Dual Pump
Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual
Note the following:
• The dual pump combines two ternary pumps in a single enclosure.
• The two pumps are referred to as left pump and right pump.
On the keypad, L refers to the left pump and R refers to the right
¨
pump.
In the Chromeleon user interface, Left refers to the left pump
¨
and Right refers to the right pump, for example, as in
PumpLeft_Pressure and PumpRight_Pressure.
• The dual pump can be shared by two different instruments (see
Sharing the Dual Pump
• You can monitor the solvent consumption of the dual pump as a
whole or separately for each pump (see
Consumption (} page 226)).
• You can monitor the liquid level in the waste container of the dual
pump as a whole or separately for each pump (see
Liquid Level in the Waste Container
In the Chromeleon software, you can share the dual pump between two
instruments.
The default assignment for the two pumps is the instrument in which
the dual pump is installed.
To share the dual pump, follow these steps:
1. In the Instrument Configuration Manager, open the dialog box for
the dual pump.
2. On the Devices tab page, assign each pump to the instrument on
which you want to use the pump. Select the instrument from the list
of available instruments.
TIP Notice that the pumps now appear in the instruments to which they
have been assigned.
9 • Pump-Specific Information
(} page 225)).
Monitoring the Solvent
(} page 227)).
Monitoring the
Page 225