Charging The Battery; Connecting The Mains Adapter; Battery Charge Level Display - Viavi 6000A V2 User Manual

Chapter 3 Starting up

Charging the battery

Charging the battery

Connecting the
mains adapter
Charging the
battery
Battery charge
level display
14
The most stable position for using the 6000A V2 Platform is the
«standing» user position.
1 At the top of the 6000A V2 Platform (upper left-hand corner), lift up
the power supply socket protector and plug in the mains adapter.
2 Connect the adapter to the mains.
The On/Off indicator starts to blink in green.
Use only the mains adapter supplied with the 6000A V2 Platform.
The adapter for some other electronic device may appear to be
identical, but entails a risk of damage to the 6000A V2 Platform.
On connection to the mains:
– if the user does not press
– when the user presses the
battery will charge during use.
The Charge indicator is lit in solid red during charge.
Once the battery is fully charged, the Charge indicator is lit in solid green
on the front panel.
When the Charge indicator on the front panel is blinking red, this mean
the power supply is not compatible with the battery used. Charge is
disabled.
It is essential to wait until charging is complete to ensure
maximum independent operating time, which may otherwise be
considerably reduced.
When the battery is installed in the instrument, a battery icon is displayed
in the top right-hand corner of the screen. Example
Icon
User Manual 76100000200 Rev. 001
O
, the battery will start the charge.
N
O
key, the instrument starts up and the
N
Battery charge level
From 100% to 70%