Table of Contents
Advertisement
Installing rear drive cage
The procedure for installing 2.5 inch and 3.5 inch rear drive cages is identical.
Prerequisites
Follow the safety guidelines listed in
Safety
instructions.
Steps
1. Align the screws on the drive cage with the screw holes on the system.
2. Lower the drive cage into the system until it is firmly seated.
3. Using Phillips #2 screwdriver, tighten the screws to secure the drive cage to the system.
Figure 68. Installing 4 x 2.5 inch rear drive cage
114
Installing and removing system components
Advertisement
Table of Contents
