Table of Contents
Advertisement
Installing the rear drive cage
The procedure for installing 2.5 inch and 3.5 inch rear drive cages is identical.
Prerequisite
Follow the safety guidelines listed in
Steps
1
Align the screws on the drive cage with the screw holes on the system.
2
Lower the drive cage into the system.
3
Using a Phillips #2 screwdriver, tighten the screws to secure the drive cage to the system.
Figure 58. Installing a 4 x 2.5 inch rear hard drive cage
100
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
