Table of Contents
Advertisement
Figure 20. Removing the drive cage
Next step
Install the drive
cage.
Installing the drive cage
Prerequisite
Follow the safety guidelines listed in
Steps
1
Align the slots on the sides of the drive cage with the standoffs on the system.
2
Lower the drive cage into the system until the slots on the drive cage engage with the standoffs on the system.
3
Slide the drive cage into the system to the lock position.
4
Using the Phillips #1 screwdriver, replace the screws to secure the drive cage to the system.
Safety
instructions.
Installing and removing system components
61
Advertisement
Table of Contents
