Installing The Rear Drive Cage - Dell EMC PowerEdge R840 Installation And Service Manual

Figure 35. Removing the rear drive cage
Next step
1 Replace the rear drive

Installing the rear drive cage

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the air shroud.
Steps
1 Align the slots on drive cage with the guides on the system chassis.
2 Lower the drive cage into the system until it is firmly seated.
3 Using a Phillips #2 screwdriver, tighten the screws.
64 Installing and removing system components
cage.
Safety instructions.
Before working inside your system.