Table of Contents
Advertisement
Figure 139. Installing the 2.5 inch drive rear backplane
Next steps
1.
Install all the
drives.
2. Connect all the cables to the backplane.
3. Follow the procedure listed in
Cable routing
Figure 140. Cable routing – 24 x 2.5 inch drive backplane with mini PERC
1. backplane
3. backplane power cable A (BP: BP1 to MB: BP1)
5. system board
7. SAS cable (BP: PE1_B to mini PERC)
After working inside your
system.
2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
4. backplane power cable B (BP: BP3 to MB: BP3)
6. mini PERC
8. backplane expander
Installing and removing system components
181
Advertisement
Table of Contents
