Table of Contents
Advertisement
Figure 63. Removing the drive cage
Next steps
1.
Install the drive
cage.
Installing the drive cage
Prerequisites
CAUTION:
To prevent damage to the drives and backplane, you must remove the drives from the system before
removing the backplane.
CAUTION:
You must note the number of each drive and temporarily label them before removal so that you can
replace them in the same locations.
Follow the safety guidelines listed in
Steps
1. Insert the front/rear drive cage into the enclosure, aligning the drive cage with the standoffs on the chassis.
safety
instructions.
Installing and removing enclosure components
59
Advertisement
Table of Contents
