Operating Unit Specifications; Switch; Led; Interfaces - Star Micronics TUP500 Series Product Specifications Manual

4.2. Operating Unit Specifications

4.2.1.

Switch

POWER Switch
SW1
SW2
Notes:
1. Be aware that the operation of the main unit may vary according to its conditions.
4.2.2.

LED

LED1
LED2
Notes:
See Figs. 4.1.2.A. and 4.1.2.b> for the positions of the switches and LED.

4.3. Interfaces

No interface card is included with this printer.
See section 2.2 for details on the optional interface card to use.

4.4. DIP Switches

Changeable on the top of the main unit.
Notes:
1. The direction for accessing the DIP switches will vary according to the layout of the con-
trol board (card chassis).
2. It is necessary to remove the card chassis (U) to access the DIP switches.
3. See secton 12.1 for the DIP switch positions.
TUP500 Series Product Specifications
Turns the printer's power ON and
OFF.
Feeds and discharges paper
Clears errors
POWER Green
ERROR Red
4-4