Releasing A Locked Cutter - Star Micronics TUP500 Series Product Specifications Manual

For models equipped with the presenter, use the release lever to open the platen unit.
9.2.3.

Releasing a Locked Cutter

Use the following procedures to release the auto-cutter lock if trouble occurs, such as when paper becomes
chewed.
Procedure (1) Turn the power off.
Procedure (2) Rotate the emergency knobs in the direction of the arrows on the top of the
auto-cutter unit case to return the cutter blades to their home position.
The emergency knob should be rotated using a tweezers, screwdriver or ball-point pen to prevent
accidents.
TUP500 Series Product Specifications
Knob
F ig. 9.2.2
9-7
Release Lever