Star Micronics TUP500 Series Product Specifications Manual page 114

14.7 . MSW6
Bit Function
F
E Auto-loading Speed
D Auto-loading Error
C Auto-loading Function
B
A
9
8
7
6
5
4
ASB Presenter Paper Position Status
3
2
1
0
*1) Presenter Operation Mode
n MSW6-3 MSW6-2
"0" 0 0
"1" 0 0
"2" 0 0
"3" 0 0
"4" 0 1
"5" 0 1
"6" 0 1
"7" 0 1
"8" 1 0
"9" 1 0
"A" 1 0
"B" 1 0
"C" 1 1
"D" 1 1
"E" 1 1
"F" 1 1
*2) ASB Presenter Paper Position Status
This function makes the presenter paper position status of the 9
When this function is invalid, the ASB 9
not changed.
When the presenter is not connected, the ASB 9
status is not changed.
*4) Auto-loading Error
Use this function to select to enable retry. Also, when a presenter is installed, auto-loading is possible if paper is
pulled out once, without a presenter paper jam error occurring, even if auto-loading fails.
A presenter paper jam error occurs when auto-loading fails when retry is disabled.
TUP500 Series Product Specifications
OFF/"0"
High speed
Retry Enabled
Valid
Invalid
MSW6-1 MSW6-0 Presenter Operation Mode
0 0 Stored in device (loop effective) → Wait for discharge paper → Recovered in
device
0 1 Stored in device (loop effective) → Wait for discharge paper → Discharged
1 0 Stored in device invalid (loop invalid) → Wait for discharge paper →
Recovered in device
1 1 Stored in device invalid (loop invalid) → Wait for discharge paper →
Discharged
0 0 Stored in device invalid (loop invalid) → Discharged
0 1 (Reserved)
1 0 (Reserved)
1 1 (Reserved)
0 0 (Reserved)
0 1 (Reserved)
1 0 (Reserved)
1 1 (Reserved)
0 0 (Reserved)
0 1 (Reserved)
1 0 (Reserved)
1 1 (Reserved)
byte presenter paper position status becomes fixed at "0" and the status is
th
byte presenter paper position status becomes fixed at "0" and the
th
ON/"1"
Slow speed
Retry Disabled
Invalid
Valid
byte of ASB valid/invalid.
th
14-13
Emulation Note
SL SP EP
○ ○ ○
○ ○ ○ *4
○ ○ ○
○ ○ ○ *2