Star Micronics TUP500 Series Product Specifications Manual page 10

(10) Line Width:
Mode
STAR Line Mode
ESC/POS Mode
(11) Cuttable Sheet Length:
CONFIGURATION
TUP542
TUP592
Notes:
1) To issue vouchers on models not equipped with the Presenter, always install the dis-
charge guide as described in precautions for designing in section 9.1.
Particularly, to cut off receipts to issue vouchers, always install the paper discharge guide
to operate the mechanism. Also consider measures for static electricity in the paper path.
2) When using paper that has a black mark, there is a restriction to the minimum voucher
length that can be handled. The black mark pitch should be within the allowable range.
See section 3.3.2 Black Mark Specifications for details on the black mark pitch.
(12) Print Head:
(13) Presenter:
Notes:
(14) Emulation:
TUP500 Series Product Specifications
Line feed amount
4 mm or 3 mm
Programmable
Cuttable Sheet Length
25 to 300mm
75 to 300mm
This does not apply to models not installed with the presenter.
See table below.
See below
Line Thermal Print Head
With Recovery Function
(1) Star Line Mode (2) Star Page Mode (3) ESC/POS Mode
3-3