Star Micronics TUP500 Series Product Specifications Manual page 50

Notes:
1. Always connect the optional large diameter roll paper holder unit (RHU-T500) to the user
frame. See section 8.1.2.
2. There are cases in which assembly can be difficult depending on the order of assembly
accompanying the change in the layout of the control board. Be careful of the order of as-
sembly.
3. The spring base comprised in the large diameter roll paper holder unit (RHU-T500) cannot
be used in the vertical type layout. The friction springs (2 springs) will be fastened directly
to the user side frame.
TUP500 Series Product Specifications 8-2