Otto Bock Michelangelo Hand Transcarpal 8E550 Instructions For Use Manual page 20

• 4 pc. 501S101=M4x12 countersunk head screws
• 4 pc. 501S84=M4x14 countersunk head screws
• 1 pc. 647G1223 instructions for use (qualified personnel)
• 1 pc. 646D903 instructions for use (user)
• 1 pc. prosthesis passport
• 1 pc. card holder for prosthesis passport
• 1 pc. cosmetic case for battery charger and power supply
Accessories
The following components are not included in the scope of delivery and must be ordered separ­
ately:
• "560X500=* AxonSoft" adjustment software
• 757L500 AxonCharge Integral
• 757B501 AxonEnergy Integral
• 13E500 AxonMaster
• 13E200=* electrode
• 13E202=* suction socket electrode
• 13E129=* electrode cable
• 8S501=* AxonSkin Natural for men (different skin colours)
• 8S502=* AxonSkin Natural for women (different skin colours)
• 8S500=* AxonSkin Visual (sheer, translucent)
• 8S511=* AxonSkin Silicone for men (different skin colours)
• 8S512=* AxonSkin Silicone for women (different skin colours)
6 Preparation for use
6.1 Alignment
Please observe the following points during alignment of the Michelangelo Hand Transcarpal:
Flexion and ulnar deviation
1
The Michelangelo Hand Transcarpal is designed in such a way that the hand is positioned in a
slightly flexed (see fig. 2), ulnar deviation (see fig. 3) position when the lamination ring is moun­
ted at a 90° angle to the socket axis (see fig. 1).
This design is based on the relaxed position of the physiological hand. and gives the Transcarpal
prosthesis a natural appearance.
20
2 3