Table of Contents
Advertisement
Echoflex Installation Guide
Switch-mount Occupancy Sensor
Custom
While the two button switch-mount sensor supports the following default
button actions in Custom mode, complete customization is available when
using ElahoAccess. In Custom mode, using default behaviors, an occupancy
event activates the zone that is configured to button 1 at full, and the vacancy
detection event deactivates the Zone (set to 0%).
Note:
when the Function switch is set to Custom. For custom configuration
using ElahoAccess, reference the ElahoAccess Mobile App integrated help
system.
Dual Tech Switch-mount Occupancy Sensor
These are the default button actions for the switch-mount sensor
Double-tap the button to toggle the
preset using a 1/2 second fade time.
Page 19 of 20
Echoflex Solutions, Inc.
Advertisement
Table of Contents
