Echoflex Installation Guide
Switch-mount Occupancy Sensor
Two Button Switch-mount Sensor
The two button switch-mount sensor offers control of two presets or zones as
determined by the Function and DIP switch settings.
Factory Defaults
The two button switch-mount sensor ships from the factory in the following
default settings:
Rotary switches are set to Address 1, Space 1. Reference
•
DIP Switches on page 5
DIP switches 1, 4, and 5 are set to On. All other switches are set to
•
Off. Reference
With the Function switch set to Preset, Preset 1 is the default.
•
With the Function switch set to Zone, Zone 1 is the default.
•
With the Function switch set to Custom, Zone 2 is the default.
•
Preset
In Preset mode, an occupancy detection event plays the preset that is
configured to button 1, and the vacancy detection event plays Space Off.
The two button switch-mount sensor supports the following button actions:
Dual Tech Switch-mount Occupancy Sensor
Double-tap the button to toggle the
preset using a 1/2 second fade time.
.
page 5
.
Page 17 of 20
Rotary and
Echoflex Solutions, Inc.