ETC Echoflex Dual Tech Installation Manual page 7

Echoflex Installation Guide
Switch-mount Occupancy Sensor
Note:
switch number 8 applies. All other DIP switch settings are ignored.
Reference
on your Dual Tech Switch-mount Occupancy Sensor. Reference the
ElahoAccess Mobile App integrated help system for details about custom
configuration using the ElahoAccess Interface.
Install Button Legends
Elaho Dual Tech Switch-mount Occupancy Sensors ship with standard button
legends installed beneath a clear lens.
Note:
transparency. Download the button legend template provided on the
Echoflex website
Each button can have a legend, installed beneath the button lens. To remove,
install, or replace a button legend you must first remove the bezel and button
lens from the station electronics.
Dual Tech Switch-mount Occupancy Sensor
When the sensor Function switch is set to Custom, only DIP
Station Configuration on page 11
Customize and print your own button legends on standard
echoflexsolutions.com
for local configuration settings
.
1.
Remove the bezel from the station
electronics.
Each corner of the bezel is provided
•
with a notch to assist with bezel
removal. Use a nail to lift a corner free,
then gently remove the bezel from the
station.
Page 7 of 20 Echoflex Solutions, Inc.