ETC Echoflex Dual Tech Installation Manual page 13

Echoflex Installation Guide
Switch-mount Occupancy Sensor
Zone Toggle Functionality
While the Function switch is set to Zone, the station allows you to toggle the
zone on and off. The controlled zone level raises to full or toggles off using a
1/2 or 2 second fade time, depending on the station type. Reference
Functionality on page 15
Zone Raise / Lower Functionality
Zone raise / lower functionality varies depending on the switch-mount sensor
type. The one button switch-mount sensor provides zone raise functionality
only. The two button switch-mount sensor provides both zone raise and zone
lower functionality. Reference
Program Preset Start (Basic Mode, Preset or Zone)
Note:
switch is set to Preset or Zone, and does not affect any behaviors in
Custom mode.
Note:
sensor is also the event that will occur with occupancy detection. Space
Off will occur with vacancy detection.
1.
Set the station Function switch to its highest position of Preset.
2.
Press and hold the [Walk Test / Program Mode] button for three
seconds to enter Program Mode. The "Mode" LED illuminates (steady
amber) and the first button control LED for the station flashes the
current (first) preset controlled.(For example, if the first preset
controlled is Preset 3, the button LED will flash three times.)
3.
Push button 1 to increase the starting preset number by one; any new
count always begins at 1. The station will update the LED indication,
flashing the LED to reflect the new preset number. (For example,
pushing the button control eight times will set the first preset for the
station to Preset 8.) All station preset controls will be consecutively
assigned beginning with the specified count.
4.
When the desired preset number is set, press and release the [Walk
Test / Program Mode] button to save the new setting. The "Mode"
LED turns off and the button LED will blink the new setting before
returning to normal operation.
Note:
currently set, exit Program Mode then reenter Program Mode; the preset
count will restart at 1.
Dual Tech Switch-mount Occupancy Sensor
.
Program Mode only affects station behaviors when the Function
The preset that is configured to the first button control on the
To change the assignment to a lower number than what is
page 15
.
Page 13 of 20
Station
Echoflex Solutions, Inc.