ETC Echoflex Dual Tech Installation Manual page 18

Echoflex Installation Guide
Switch-mount Occupancy Sensor
Note:
button control 2 for Off functionality. Reference
on page 5
Zone
In Zone mode, an occupancy detection event activates the zone that is
configured to button 1 at full, and the vacancy detection event deactivates the
Zone (set to 0%).
The two button switch-mount sensor supports the following button actions:
Dual Tech Switch-mount Occupancy Sensor
*DIP switch 1 is set to On by factory default, which reserves
for instructions to change this default setting.
Double-tap the button to toggle the
preset using a 1/2 second fade time.
Rotary and DIP Switches
Double-tap the button to toggle the
preset using a 1/2 second fade time.
Page 18 of 20 Echoflex Solutions, Inc.